HOW TO CHECK YOUR TOKEN BALANCE ON THE OLD CONTRACT

  1. ITS EASY!
  2. Open up your wallet in MyEtherWallet.com
  3. Add a custom token as follows:
    ADDRESS: 0x7b79387dD30dC6848dd2308C825B6802e99aBc84
    SYMBOL: E4
    DECIMAL POINTS: 0
  4. Click Save. Your E4 tokens will appear.


HOW TO CHECK YOUR TOKEN REWARDS ON THE OLD CONTRACT

  1. Now you’re in, It’s a teeny bit less easy but you can do it!
  2. Go to MyEtherWallet.com
  3. Go to the section called “Interact With Contract”
  4. Copy and Paste the following in “Contract Address”:
    0x7b79387dD30dC6848dd2308C825B6802e99aBc84
  5. Copy and Paste the following in “ABI/JSON Interface”:
    [{"constant":true,"inputs":[{"name":"_addr","type":"address"}],"name":"checkDividends","outputs":[{"name":"_amount","type":"uint256"}],"payable":false,"type":"function"},{"constant":false,"inputs":[],"name":"withdrawDividends","outputs":[{"name":"namount","type":"uint256"}],"payable":false,"type":"function"}]
  6. Select the function:
    CheckDividends

    For this function you must enter your address because the smart contract keeps track of tokens by the address of the holder.


HOW TO WITHDRAW YOUR TOKEN REWARDS ON THE OLD CONTRACT

  1. Go to MyEtherWallet.com
  2. Go to the section called “Interact With Contract”
  3. Copy and Paste the following in “Contract Address”:
    0x7b79387dD30dC6848dd2308C825B6802e99aBc84
  4. Copy and Paste the following in “ABI/JSON Interface”:
    [{"constant":true,"inputs":[{"name":"_addr","type":"address"}],"name":"checkDividends","outputs":[{"name":"_amount","type":"uint256"}],"payable":false,"type":"function"},{"constant":false,"inputs":[],"name":"withdrawDividends","outputs":[{"name":"namount","type":"uint256"}],"payable":false,"type":"function"}]
  5. Select the function:
    WithDraw Dividends

    Use 100,000 Gas, send 0 Ether

  6. If done correctly, your token rewards will be sent to your wallet.


HOW TO CONVERT OLD E4ROW TOKENS INTO NEW E4ROW TOKENS

For a summary of the new features of the new token, refer to: https://medium.com/e4row/the-new-e4row-token-is-live-ed480fbe0ebc
A. VERIFY THAT YOU’RE READING THESE INSTRUCTIONS FROM OUR HTTPS WEBSITE https://e4row.com/e4row/how-to/

  1. First, check your current dividend balance on the old contract and if it’s greater than zero, withdraw all of your current dividends on the old E4ROW token contract. To do so, refer to the instruction above.​
  2. Check your token balance on the old E4ROW token contract:
    1. IT’S EASY!
    2. Open a new window or tab to MyEtherWallet.com
    3. Go to the section called “Interact With Contract”
    4. Copy and Paste the following in “Contract Address”:
      0x7b79387dD30dC6848dd2308C825B6802e99aBc84
    5. Copy and Paste the following in “ABI/JSON Interface”:
      [{"constant":false,"inputs":[{"name":"_spender","type":"address"},{"name":"_value","type":"uint256"}],"name":"approve","outputs":[{"name":"success","type":"bool"}],"payable":false,"type":"function"},{"constant":true,"inputs":[],"name":"totalSupply","outputs":[{"name":"supply","type":"uint256"}],"payable":false,"type":"function"},{"constant":false,"inputs":[{"name":"_from","type":"address"},{"name":"_to","type":"address"},{"name":"_value","type":"uint256"}],"name":"transferFrom","outputs":[{"name":"success","type":"bool"}],"payable":false,"type":"function"},{"constant":true,"inputs":[{"name":"_owner","type":"address"}],"name":"balanceOf","outputs":[{"name":"balance","type":"uint256"}],"payable":false,"type":"function"},{"constant":false,"inputs":[{"name":"_to","type":"address"},{"name":"_value","type":"uint256"}],"name":"transfer","outputs":[{"name":"success","type":"bool"}],"payable":false,"type":"function"},{"constant":true,"inputs":[{"name":"_owner","type":"address"},{"name":"_spender","type":"address"}],"name":"allowance","outputs":[{"name":"remaining","type":"uint256"}],"payable":false,"type":"function"},{"anonymous":false,"inputs":[{"indexed":true,"name":"_from","type":"address"},{"indexed":true,"name":"_to","type":"address"},{"indexed":false,"name":"_value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"name":"_owner","type":"address"},{"indexed":true,"name":"_spender","type":"address"},{"indexed":false,"name":"_value","type":"uint256"}],"name":"Approval","type":"event"}]
    6. Click ACCESS and then Select the function:
      balanceOf
    7. In the _owner field, enter the public address of your wallet that owns E4ROW tokens, and click READ.
    8. Note the number of tokens that you own, as displayed in the “balance” field.
  3. Next you need to approve a transfer of your tokens to the new E4ROW Token contract:
    1. ITS EASY!
    2. Go to MyEtherWallet.com
    3. Go to the section called “Interact With Contract”
    4. Use the same “Contract Address” from step 2
    5. Use the same “ABI/JSON Interface” from Step 2
    6. Click ACCESS and then Select the function:
      approve
      Set _spender to: 0xCe5c603C78d047Ef43032E96b5B785324f753a4F

      This is the address of the new token contract.

      REMINDER, MAKE SURE YOU’RE VIEWING THESE INSTRUCTIONS ON https://e4row.com/e4row/how-to/, to verify the authenticity of these addresses.

      ​Set the _value to the number of tokens that you noted in step #2
    7. If prompted, enter the required information to access your wallet, and then click WRITE.
      Send 0 Ether.

      Be sure to use 100,000 Gas.
    8. Click “View Your Transaction” and Wait for the transaction to complete.
  4. Lastly, call optInFromClassic on the new E4ROW Token contract:
    1. IT’S EASY!
    2. If you are in MyEtherWallet.com, then exit
    3. Open a new window or tab to MyEtherWallet.com
    4. Go to the section called “Interact With Contract”
    5. Copy and Paste the following in “Contract Address”:
      0xCe5c603C78d047Ef43032E96b5B785324f753a4F</code
    6. REMINDER, MAKE SURE YOU’RE VIEWING THESE INSTRUCTIONS ON https://e4row.com/e4row/how-to/, to verify the authenticity of these addresses.

    7. Copy and Paste the following in “ABI/JSON Interface”:
      ​[{"constant":false,"inputs":[],"name":"optInFromClassic","outputs":[],"payable":false,"type":"function"}]
    8. Click ACCESS and then Select the function:
      optInFromClassic
    9. Enter the required information to access your wallet (this must be the same address that holds the tokens on the old contract), and then click WRITE.
      Send 0 Ether.

      Be sure to use 500,000 Gas.
    10. Click “View Your Transaction” and Wait for the transaction to complete.
    11. Once the transaction completes, select the Event Logs tab. View the very bottom line as Text – it should read
      "Successfully Switched Over!"

You can now read the new contract, including your new balance on this URL:
​https://etherscan.io/address/0xCe5c603C78d047Ef43032E96b5B785324f753a4F#readContract

New balance is on Line 11 (you will need to enter your public address). Your balance will be displayed as 100000 times your former balance of original E4ROW tokens. No, that’s not a typo. Why 100000 times instead of 1000 times? Because etherscan.io doesn’t show the decimal places, therefore 1000.00 appears as 100000.

Other things to do:
Download a new version of Uncle Finney’s Poker at https://www.unclefinneys.com/.
IMPORTANT: before you download a new version of Uncle Finney’s Poker, BACK UP YOUR WALLET! or transfer all of your funds to some other wallet, just to be safe.


HOW TO CHECK YOUR TOKEN BALANCE ON THE NEW CONTRACT

  1. ITS EASY!
  2. Open up your wallet in MyEtherWallet.com
  3. Add a custom token as follows:​
    ADDRESS: 0xCe5c603C78d047Ef43032E96b5B785324f753a4F
    SYMBOL: E4ROW
    DECIMAL POINTS: 2
  4. Click Save. Your new E4ROW tokens will appear.

HOW TO CHECK YOUR TOKEN REWARDS ON THE NEW CONTRACT

  1. Now you’re in, It’s a teeny bit less easy but you can do it!
  2. Go to MyEtherWallet.com
  3. Go to the section called “Interact With Contract”
  4. Copy and Paste the following in “Contract Address”:
    0xCe5c603C78d047Ef43032E96b5B785324f753a4F
  5. Copy and Paste the following in “ABI/JSON Interface”:
    [{"constant":true,"inputs":[{"name":"_addr","type":"address"}],"name":"checkDividends","outputs":[{"name":"_amount","type":"uint256"}],"payable":false,"type":"function"},{"constant":false,"inputs":[],"name":"withdrawDividends","outputs":[{"name":"namount","type":"uint256"}],"payable":false,"type":"function"},{"constant":true,"inputs":[{"name":"_addr","type":"address"}],"name":"getAccountInfo","outputs":[{"name":"_tokens","type":"uint256"},{"name":"_snapshot","type":"uint256"},{"name":"_points","type":"uint256"}],"payable":false,"type":"function"},{"constant":false,"inputs":[{"name":"_to","type":"address"}],"name":"transferDividends","outputs":[{"name":"success","type":"bool"}],"payable":false,"type":"function"}]
  6. Select the function:
    CheckDividends

    ​For this function you must enter your address because the smart contract keeps track of tokens by the address of the holder.


HOW TO WITHDRAW YOUR TOKEN REWARDS ON THE NEW CONTRACT

  1. Go to MyEtherWallet.com
  2. Go to the section called “Interact With Contract”
  3. Copy and Paste the following in “Contract Address”:
    0xCe5c603C78d047Ef43032E96b5B785324f753a4F
  4. Copy and Paste the following in “ABI/JSON Interface”:
    [{"constant":true,"inputs":[{"name":"_addr","type":"address"}],"name":"checkDividends","outputs":[{"name":"_amount","type":"uint256"}],"payable":false,"type":"function"},{"constant":false,"inputs":[],"name":"withdrawDividends","outputs":[{"name":"namount","type":"uint256"}],"payable":false,"type":"function"},{"constant":true,"inputs":[{"name":"_addr","type":"address"}],"name":"getAccountInfo","outputs":[{"name":"_tokens","type":"uint256"},{"name":"_snapshot","type":"uint256"},{"name":"_points","type":"uint256"}],"payable":false,"type":"function"},{"constant":false,"inputs":[{"name":"_to","type":"address"}],"name":"transferDividends","outputs":[{"name":"success","type":"bool"}],"payable":false,"type":"function"}]
  5. Select the function:​
    WithDraw Dividends

    Use 100,000 Gas, send 0 Ether

  6. If done correctly, your token rewards will be sent to your wallet.

Connect

Reddit

Join the discussion

Slack

To request an invitation to join our Slack channel, click here. If already a member, click on the box above.

GitHub

Access our open source code

Join LPG

Join our team